Titanium Grade-5 TI6Al4V, TC4, Ti64, or ASTM Grade 5
| Common Name | |
|---|---|
| Ti-6Al-4V | Titanium Grade 5 |
| Ti-6-4 | Ti64 |
| UNS | |
| R56400 | |
| General Information | |
| Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus-beta class, and is also the most common of all titanium alloys. The alloy is castable and is utilized “as cast” in sporting goods. The wrought material is used in aerospace, medical, and other applications where moderate strength, good strength to weight, and favorable corrosion properties are required. The alloy is available as castings, wire, bar, plate, sheet, forgings, rings, and billet. | |
| Common Specification | |
| Specification | Product Form |
| AMS 4911 | Strip, Sheet, and Plate, Annealed |
| AMS 4920 | Forgings, Alpha-Beta or Beta Processed, Annealed |
| AMS 4928 | Bar, Wire, Forgings, Ring, Annealed |
| AMS 4965, AMS 4963 & AMS 4965, AMS 4963 & AMS 4967 (Capable of) | Bar, Wire, Forgings, Ring, Solution Treated & Aged |
| AMS-T-9047 | – |
| ASTM B348 (Grade 5) | Bar and Billet, Annealed |
| ASTM B367 (Grade 5) | Castings |
| ASTM F1472 | Wrought Alloy for Surgical Implants |
| AWS A5.16 (ERTi-5) | Weld Wire |
| Chemistry Requirements | ||||||||
|---|---|---|---|---|---|---|---|---|
| N | C | H | Fe | O | Al | V | Y | Ti |
| 0.05 | 0.08 | 0.125 | 0.4 | 0.2 | 5.5-6.75 | 3.5-4.5 | 0.005 | Balance |
Note: Chemical requirements are not consistent between specifications. Check referenced specifications.
| Minimum Tensile Properties | ||||
|---|---|---|---|---|
| Condition | UTS ksi (Mpa) | >0.2%YS ksi (MPA) | % El. | % RA* |
| Solution Treated & Aged | 170 (1172) | 160 (1103) | 8-10 | 15-20 |
Note: Mechanical properties vary with diameter. Check referenced specifications.
| Typical Tensile Properties | ||||
|---|---|---|---|---|
| Condition | UTS ksi (Mpa) | >0.2%YS ksi (MPA) | % El. | % RA* |
| Annealed | 160 (1110) | 148 (1020) | 15 | – |
| Solution Treated & Aged (BSTA) | 174 (1200) | 152 (1050) | 7 | – |
| Solution Treated & Aged (STA-1) | 176 (1210) | 163 (1120) | 13 | – |
| Solution Treated & Aged (STA-2) | 229 (1580) | 204 (1410) | 4 | – |
Note: Typical properties are not to be utilized as a requirement, but are only listed for guidance. These properties may or may not be attainable in all circumstances.
* %Ra not required by all specifications
Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. PT. Special Metals Indonesia is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.