MMO, Platinum coated Titanium Anode, Cathode

Special Metals Indonesia menawarkan Anoda Titanium berlapis Platinum dan Anoda MMO untuk Industri Elektrokimia dan Finishing Logam. Kami menyediakan anoda Tabung MMO dengan kabel KYNAR/HMWPE/XLPE/PVC yang terpasang sesuai kebutuhan anda. Batang atau tabung titanium yang bulat dan padat serta dilapisi dengan MMO. Anoda MMO awalnya dikembangkan untuk menghasilkan klorin dari proses elektrolisis air laut. Selama bertahun-tahun aplikasinya telah berkembang menjadi banyak kegunaan seperti:

• Electro dialysis.
• Electroforming.
• DSA Cathodic Protection.
• Electrochemical Sensing.
• Electro winning and Refining of metals.
• Electrolytic Regeneration of chromic acid.
• Electroplating for precious and base metals.
• Electrolytic recovery for precious and base metals.
• Electrolytic Production of Sodium Hypochlorite.
• Electro synthesis of Inorganic & Organic chemicals

What is MMO – Mixed Metal Oxide coating?

Pelapisan MMO terdiri dari komponen konduktif elektrokatalitik yang mengkatalisis reaksi untuk menghasilkan aliran arus, dan oksida curah (material pengisi yang lebih terjangkau) yang mencegah korosi pada material substrat (titanium)..

For cathodic protection applications two primary electro catalysts are used:

1. Ruthenium Oxide (RuO₂)
Ruthenium oxide is the cheaper of the two electro catalysts, should only be used in chlorinated environments (sea water). The catalytic life is significantly reduced when the primary reaction is the evolution of oxygen (fresh water, soil, coke backfill and concrete environments).

2. Iridium Oxide (IrO2)
Most cathodic protection manufacturers use Iridium Oxide based mixed metal oxide for their cathodic protection anodes because it is suitable for both chlorinating and oxygenating environments. The bulk oxides are typically a mixture of Titanium Dioxide (TiO₂) and Tantalum Oxide (TaO₅). Their primary purpose is to provide an oxide film over the substrate material to prevent corrosion of the substrate.

For MMO anodes, Titanium Grades 1 and 2 are used as MMO anodes base material. Grade 1 titanium is slightly more malleable than Grade 2 titanium but is also less commonly used in industry. There is no “better” between Titanium Grade 1 and Grade 2 – they can be used interchangeably with no impact on performance. The compositions for Grade 1 and Grade 2 are very similar and overlap so that often the same material meets the requirements of both Grade 1 and Grade 2 and can be dual certified.

Contact us today to discuss more.

You Know You’re A Machinist When you can’t remember your wife’s birthday or your wedding anniversary, but you can name all the tap drills up to 1 in. 🙂